How much does new siding cost in Virginia?

HomeAdvisor reports average vinyl siding projects of about $11,104 in Alexandria and Arlington and $9,397 in Virginia Beach. A full 1,250-square-foot vinyl re-side costs about $17,000 to $18,000 in Virginia metros (Cost vs. Value 2025), and fiber cement about $18,899 in Richmond (2024).

Do I need a permit to replace siding in Virginia?

Siding replacement on one- and two-family homes is exempt from permits under the Virginia building code where the design wind speed is 100 mph or less. Coastal areas with higher wind speeds, historic districts and structural repairs can require one.

Does a siding contractor need a license in Virginia?

Yes. Contractors need a DPOR license once a job reaches $1,000. Check the license number online before you sign.

Is siding cheaper in Richmond than in Northern Virginia?

Generally yes. Labor costs in the Washington area are higher, and many Northern Virginia homes are larger and subject to HOA product rules. Published averages for Alexandria and Arlington are about $11,100 for vinyl projects, compared with about $9,400 in Virginia Beach.

Does new siding pay off in Virginia?

Vinyl recouped about 80% of its cost in Virginia Beach in 2025, and fiber cement about 99% in Richmond in 2024, according to Cost vs. Value data.

Siding Cost in Virginia (2026): NoVA, Richmond, Norfolk

The short answer

Homeowners who report vinyl siding projects on HomeAdvisor paid about $11,104 on average in Alexandria and Arlington and about $9,397 in Virginia Beach. For a defined full re-side of 1,250 square feet with trim, the Cost vs. Value Report puts vinyl at about $18,126 in the Washington, DC area and $17,361 in Virginia Beach (2025), and fiber cement at about $18,899 in Richmond (2024).

Project	Typical range	Source
Vinyl siding installation, Alexandria	$5,879–$17,000 typical; about $11,104 on average	HomeAdvisor
Vinyl siding installation, Arlington	$4,625–$14,500 typical; about $11,104 on average	HomeAdvisor
Vinyl siding installation, Virginia Beach	$4,725–$13,316 typical; about $9,397 on average	HomeAdvisor
Vinyl siding repair, Fairfax	$310–$646 typical; about $475 on average	HomeAdvisor
Vinyl, full 1,250 sq ft re-side, Washington DC area	about $18,126	Cost vs. Value 2025
Vinyl, full 1,250 sq ft re-side, Virginia Beach	about $17,361; 80.2% recouped	Cost vs. Value 2025
Fiber cement, full 1,250 sq ft re-side, Richmond	about $18,899; about 99% recouped	Cost vs. Value 2024

Cost figures are published averages and ranges for orientation only – not quotes. The contractor you are connected with measures your home and sets the price.

Why Northern Virginia costs more

Labor costs in the Washington area are among the highest in the region, and many Northern Virginia homes are larger two- and three-story colonials and townhouses that need more scaffolding. HOA requirements for specific colors, profiles or premium products, and historic-district rules in places like Alexandria and Leesburg, can add to the price. Small repairs, by contrast, are inexpensive – HomeAdvisor reports vinyl repairs in Fairfax averaging under $500 – as long as matching panels exist.

Richmond and Hampton Roads

Richmond and Hampton Roads generally see somewhat lower prices than Northern Virginia. In Richmond, historic neighborhoods such as the Fan and Church Hill add design review and often call for fiber cement or wood; in Henrico, Hanover and Chesterfield, replacing builder-grade vinyl is the typical project. In Hampton Roads, coastal wind and salt air shape the product choice: high-wind installation, secured soffit and corrosion-resistant fasteners.

Virginia’s permit rule for siding

Virginia has an unusual rule. Under the Uniform Statewide Building Code (13VAC5-63-80), replacing or installing siding on one- and two-family homes is exempt from permits – but only where the design wind speed is not greater than 100 mph. Many coastal areas have higher design wind speeds, so a permit can be required there. Localities may also require a permit for replacement siding in designated historic districts, and structural repairs to the wall always need one. Your contractor or the local building department can tell you which applies to your address.

License rules

Contractors in Virginia need a license from the Department of Professional and Occupational Regulation (DPOR) once a job reaches $1,000; the class (A, B or C) depends on project size. Homeowners who hire unlicensed contractors often have little recourse. Ask for the license number and check it online before you sign.

Extras to budget for

Removal of old siding – often aluminum on older NoVA and Richmond homes; typically $1,000 to $3,000 nationally.
Sheathing and framing repairs – humid summers rot the wall behind failed siding; typically $500 to $5,000.
Soffit and fascia – HomeAdvisor puts installation or repair at about $6 to $20 per linear foot.
Lead-safe work on pre-1978 homes when more than 20 square feet of painted exterior surface is disturbed.
HOA or historic requirements for specific products and trim.

Resale value

In the 2025 Cost vs. Value Report, vinyl siding replacement recouped about 80% of its cost in Virginia Beach, and in 2024 fiber cement recouped about 99% in Richmond. Nationally, the 2025 report found about 97% for vinyl and 114% for fiber cement. In a strong market such as Northern Virginia, well-kept exteriors also help a house stand out among many similar homes.

A worked example

For a two-story colonial with about 2,000 square feet of wall, national per-square-foot ranges put the siding alone at roughly $6,000 to $24,000 in vinyl ($3–$12 per square foot) and $10,000 to $28,000 in fiber cement ($5–$14). Add tear-off, trim, soffit and fascia and any repairs, and a complete project in Northern Virginia often lands at or above the Cost vs. Value figures. A townhouse end unit or a rear wall costs a fraction of that.

Townhouses in Northern Virginia

Townhouse re-siding has its own rules. The walls you own may end at the party line, and the HOA may require a specific product, color and profile so the building stays uniform – or may coordinate the whole row at once. End units have a large side wall that is often the most exposed to weather. Ask your HOA before collecting quotes, and ask contractors how they handle the joint with the neighbor’s siding and any shared trim.

Material choices by region

Northern Virginia: quality vinyl and insulated vinyl dominate in HOA communities; fiber cement is common on higher-end homes and historic districts.
Richmond: fiber cement and wood for historic neighborhoods, vinyl in the suburbs, mildew-resistant finishes for shaded lots.
Hampton Roads: fiber cement and wind-rated vinyl with reinforced nailing hems, PVC or aluminum trim and corrosion-resistant fasteners near the water.

When to schedule in Virginia

Spring and fall are the most comfortable seasons for siding work in Virginia. Summer heat and afternoon storms slow crews down, and on the coast the Atlantic hurricane season (June 1 to November 30) can bring delays and a surge in storm-repair demand. Getting measured in winter lets you order materials and start early in spring.

How to keep the price in check

Compare quotes line by line for the same scope and product line
Ask how rot repairs are priced before work starts
Check HOA and historic requirements before choosing a premium product you may not need
Schedule outside the spring rush where possible
Combine siding with windows or gutters to set up scaffolding once

Siding cost in Virginia (2026): Northern Virginia, Richmond and Hampton Roads