How much does it cost to re-side a house in Ohio?

HomeAdvisor reports average vinyl siding projects of about $8,168 in Columbus, $7,825 in Cincinnati and $6,111 in Dayton, including partial jobs. A full 1,250-square-foot re-side costs nearly $18,000 in vinyl nationally and about $23,515 in fiber cement in the East North Central region (Cost vs. Value 2025).

Do I need a permit for siding in Ohio?

It depends on the city. Columbus requires a building permit for siding replacement, Cleveland requires a permit plus Landmarks Commission review, and many suburbs have their own rules. Your contractor should know the rule and pull the permit.

Does fiber cement pay off in Ohio?

In the 2025 Cost vs. Value Report it recouped about 101% of its cost at resale across the East North Central region. It costs more up front than vinyl but lasts longer and handles impacts better.

Is siding cheaper in the winter in Ohio?

Some contractors have more open dates in late fall and winter, but vinyl needs extra care in the cold and some finishes need mild temperatures. Many homeowners get measured in winter and install in spring.

Siding Cost in Ohio (2026): Columbus, Cincinnati, Dayton

The short answer

Homeowners who report siding projects on HomeAdvisor paid about $8,168 on average in Columbus, $7,825 in Cincinnati and $6,111 in Dayton for vinyl siding installation or replacement. Those averages include many partial jobs. A defined full re-side of 1,250 square feet with trim costs considerably more: the 2025 Cost vs. Value Report puts fiber cement at about $23,515 in the East North Central region (Ohio, Michigan, Indiana, Illinois, Wisconsin) and the national vinyl job at nearly $18,000.

Project	Typical range	Source
Vinyl siding installation, Columbus	$4,222–$12,866 typical; about $8,168 on average	HomeAdvisor
Vinyl siding installation, Cincinnati	$4,408–$11,938 typical; about $7,825 on average	HomeAdvisor
Vinyl siding installation, Dayton	$5,500–$8,195 typical; about $6,111 on average	HomeAdvisor
Fiber cement, full 1,250 sq ft re-side, East North Central	about $23,515; about 101% recouped	Cost vs. Value 2025
Vinyl, full 1,250 sq ft re-side, national	nearly $18,000; about 97% recouped	Cost vs. Value 2025
Vinyl siding, whole house, national	$6,375–$18,249; about $12,205 on average	HomeAdvisor

Cost figures are published averages and ranges for orientation only – not quotes. The contractor you are connected with measures your home and sets the price.

Why the city averages are lower than full-job prices

The HomeAdvisor city figures average all the siding projects homeowners report – including a single wall, a gable, a garage or a small addition. The Cost vs. Value figure describes one complete project: 1,250 square feet of new siding with trim, priced at regional rates. If you are re-siding a whole two-story house, expect to be closer to the full-job figures.

Per square foot

National cost guides put installed prices at roughly $3 to $12 per square foot for vinyl (about $7.50 on average), about $8 for insulated vinyl, $4 to $13 for engineered wood and $5 to $14 for fiber cement. Ohio’s labor rates are generally moderate, so many Ohio projects land in the lower half of those ranges – unless the house needs extensive preparation.

Extras that show up on Ohio homes

Several layers of old siding. Common in Cleveland, Akron, Youngstown and older parts of Dayton and Cincinnati. Tear-off and disposal usually run $1,000 to $3,000 nationally, more with several layers.
Asbestos-cement shingles. Found on many homes from the 1920s to the 1960s. Removal must follow Ohio EPA and local rules and adds cost; covering intact shingles is sometimes an option.
Rotted sheathing. Freeze-thaw cycles and humid Ohio River summers rot the wall behind failed siding. Repairs typically add $500 to $5,000.
Soffit and fascia. Installing or repairing soffit and fascia typically costs $6 to $20 per linear foot according to HomeAdvisor; on a one-story home with about 250 linear feet, that is roughly $1,500 to $5,000.
Lead paint. Homes built before 1978 require lead-safe work practices when more than 20 square feet of painted exterior surface is disturbed.
Steep lots. Cincinnati’s hillside neighborhoods and parts of Akron and Cleveland need more scaffolding and labor.

A worked example

Take a two-story Ohio colonial with about 2,000 square feet of wall to cover. Using the national per-square-foot ranges, the siding alone comes to roughly $6,000 to $24,000 in vinyl, $8,000 to $26,000 in engineered wood and $10,000 to $28,000 in fiber cement. Add removal of the old siding, new soffit and fascia, trim and any sheathing repairs, and a complete project often lands in the mid-to-high teens for vinyl and in the twenties for fiber cement – in line with the Cost vs. Value figures. A small ranch with siding only on the gables can cost a fraction of that. The contractor’s written price after measuring is what counts.

Regional differences inside Ohio

Cleveland and the snowbelt: the oldest housing and the most snow. Expect more tear-off, asbestos handling and sheathing repair, and consider impact-resistant products.
Akron, Canton and Youngstown: many century-old frame houses with several layers of siding; removal and preparation drive the price.
Columbus: lots of 1990s and 2000s subdivisions with builder-grade vinyl ready for its first replacement; HOA color and material rules are common.
Cincinnati: hillside neighborhoods add access costs; historic districts need board approval; northern suburbs mirror Columbus.
Dayton and Springfield: the lowest reported averages among the three metros, and a storm-prone spring season.

Resale value in Ohio

In the 2025 Cost vs. Value Report, fiber cement siding replacement recouped about 101% of its cost at resale across the East North Central region, compared with about 114% nationally. Vinyl siding recouped about 97% nationally. Returns in individual metros can be lower where home prices are modest, but siding remains one of the better-returning exterior projects – and a house with failing siding is harder to sell at all.

Permits and hiring rules in Ohio

Ohio does not issue a statewide license for siding contractors, but cities and villages set their own rules. Examples: in the City of Columbus, replacing exterior siding needs a building permit but no plan review; in the City of Cleveland, siding replacement needs a permit from the Department of Building and Housing and goes through Landmarks Commission review, while small same-material repairs up to 10% of a wall count as repairs; in Cincinnati, homes in local historic districts need a Certificate of Appropriateness for exterior changes. Many suburbs require contractor registration. Always ask who pulls the permit and get the scope, product and warranties in writing.

How to keep the price in check

Get quotes that cover the same scope: removal, weather barrier, trim, soffit, fascia, gutters off and on
Ask how rotted sheathing will be priced if the installer finds it
Standard colors and lap profiles cost less than premium colors, shakes or board and batten
Combine siding with window or roof work where it makes sense, so trim and flashing are done once
Schedule outside the spring rush if you can; many Ohio contractors are busiest from April to June

Which material for Ohio?

Vinyl remains the most common choice in Ohio because of price and low upkeep. In colder, snowier parts of the state – the Cleveland snowbelt and Northeast Ohio – thicker or insulated vinyl, engineered wood and fiber cement hold up better to cold-weather impacts; Consumer Reports found that all-vinyl siding did worse in its impact tests at 0°F than at 70°F. In historic districts, fiber cement or wood with a traditional lap profile is usually the safer choice.

Siding cost in Ohio (2026): Columbus, Cincinnati, Dayton and beyond